#4444 20K Industry Standard Rail to OE Puck Rail Adapter for GM Trucks with pucks
This 20K OE Series industry standard rail adapter for GM trucks with pucks, converts any PullRite ISR Series hitch, or any other brand industry standard type hitch with tabbed/spade feet into an OE Puck mounted one.
Not sure how the OE Puck Mounting System works? Click here for more information.
Centered over the axle for a better towing and handling, this OE Series adapter breaks down into 4 individual pieces, uses 4 independent mounting posts and requires NO TOOLS to install or remove!
Don't own a PullRite hitch yet? Consider these OE Puck mounted fifth wheel hitches before you buy.
If you're starting fresh, then check out the different types of mounting systems and the PullRite hitches that use them, click here.
IMPORTANT: The #4444 adapter cannot be used with the #2300 SuperGlide HD hitch.
Kit includes adapter rails and hardware.
- Fits any Industry Standard hitch
- Fully Removable for a clean bed
- Dismantles to four pieces
- Easier to install/uninstall
- Mounts hitch centered-on-axle
Limitations/Notes:
A towing system includes each vehicle and component involved in towing. Each item in your towing system has a capacity or weight rating. You trailer has a Gross Vehicle Weight Rating, or GVWR. Your truck has a tow capacity, payload capacity, and possibly more. In addition, your fifth wheel hitch has a weight rating. This weight rating must be at, or above, the GVWR of your trailer for you to tow safely. In addition, if your truck can tow larger loads (has a larger capacity) than the rating of your hitch, your system is only safe to tow loads at the lower rating, that of the hitch.
Your mounting kit also has a weight rating, just like your fifth wheel hitch. Many times, these rating are designed to match. But, this is not always the case. Your mounting kit may be higher rated then your fifth wheel hitch, but it also could be lower depending on the components involved. The lowest rating of any one component in the system becomes the rating of the entire system. If your mounting kit is rated to 18,000 lbs., and your hitch is rated at 24,000 lbs., the weight rating of the entire system will not be above 18,000 lbs. Other components in the system could lower the actual system rating further.
It is the end users responsibility to ensure a safe towing experience. To this end, it is your responsibility to ensure that the truck, trailer, hitching components, and all other items involved are rated or have a capacity sufficient for the loads involved.
